Categories

System malfunctions and false alarms can be exasperating, and even more concerning, may prevent your home’s security from working the way it should. Fortunately, most problems, from false alarms to dead batteries, are straightforward to correct. Explore our suggestions for troubleshooting your home alarm system in Binghamton. We’ll help you keep your household shielded and your system running as it should.

Test Your Home Security System In Binghamton

One of the most effective ways to troubleshoot your property’s security is to test it! Modern systems allow you to place them in test mode to keep you from initiating an emergency response from monitoring agents. Once in test mode, take these steps:

• Activate your system as you normally would when you head out.
• Open a window or door that has a contact sensor, or test other sensors. Close the window or door so it doesn’t prompt the alarm as you get out of test mode.
• Permit the alarm to sound for 60 seconds to ensure communications with the security company and to make an entry in the alarm activity log.
• Continue testing sensors as you wish
• Inspect the alarm’s activity log to validate proper function.

No need to worry, monitoring specialists can see that your alarm system is being tested. Just be sure to switch out of test mode when you’re done. It’s smart to test monthly or whenever you adjust your home’s phone or internet provider.

Check The Position And Condition Of Motion Sensors

Although an essential element of your alarm system, motion detectors are well known for false alarms. You can help prevent them with some simple troubleshooting.

• Perform a physical check. Is there something that could move within the sensor’s detection area, like a curtain blown in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and debris can cause malfunctions. Make sure the face is clean.
• Does the motion detector come with pet immunity you can activate? Some can be configured to ignore pets weighing up to 100 pounds.
• When was the battery replaced? A nearly depleted battery might impact performance or result in false alarms.
• Is the sensor pointing toward a heat source? Excess heat from sunlight or a fireplace can cause an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Signals

One of the great aspects of new home security systems is that they’ll let you know when batteries are dying. If your system is equipped with a app or control panel, you’ll usually see alerts there. Depending on your system, you might detect an occasional beep when batteries are getting low. 

Motion sensors, contact sensors, smoke detectors, and other wireless devices have batteries that will have to be replaced every year or two. It’s wise to keep batteries ready and set a replacement schedule. Top systems also include a rechargeable backup battery for the primary control panel. This backup battery helps keep your system functioning if you have a power outage and should charge back up once power is back online. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Easy With ADT Home Security In Binghamton 

As the foremost name in home security, ADT builds systems that supply unrivaled functionality and convenience. Accessing test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always receive updates when a sensor battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Binghamton home and family. Dial (607) 204-9052 or fill out our form today!